The FC13 satellite is one of the possible building BUS expansions for the PB control units. It is equipped with 8 random variable or fixed reference inputs, which are available on a terminal block. Its small size allows it to be housed in junction boxes installed in the various environments to be protected. The BUS address is programmed by dip switches. It has LED indicators for the CPU and BUS activity status and for the status of the self-resetting electronic protection fuse on the power supply for the inputs.

Resistive balancing other than the PB standard can be selected simply using dip switches. It can therefore interface to sensors that were previously connected to other control units, leaving the existent resistors. In this way, the control unit can be replaced while minimising the costs and system downtime.

Versions and order codes
FC 13 (IP66 metal enclosure)
With 8 random variable or fixed reference inputs. Dimensions 16.5 x 19.2 x 8.2 cm (h x w x d).

FC 13/P (IP56 plastic enclosure)
As for FC13 with dimensions 15.5 x 20 x 8 cm (h x w x d)

PB 222 (Without enclosure)
Board with 8 random variable or fixed reference inputs, supplied with fixing accessories. Dimensions 10.3x16x2.5 cm (h x w x d). Mechanically and electrically compatible with the previous models, for which it can be used as a replacement.

Power Supply
12Vdc protected against polarity inversion and transients. Self-resetting electronic protection fuse on the power supply available for the inputs.

Consumption
30 mA

Protection
Tamper-proof enclosure with a lever microswitch mounted on the electronic board.

Connections
The BUS connection is made using 2 x 1.5 mm2 shielded cable for BUS lengths up to 1500 m.

Resistor values - Controlled balancing
In addition to the PB Elettronica standard: Aritech AdvisorTM, Axel AxisTM (various models), Cisa HydraTM, Hesa MetroTM, Siemens Guarto CS6TM, Guardall WindsorTM, Teledata SiriusTM, Citel NovaXTM, Citel NovaTM, Ritas HornetTM, CNS StarsTM. Others are available on request.

Options
BUS splitter board (PB 220 “single” or “triple” versions) allowing isolated and independent BUS branches.